Exports

Nesting Studio

CAM Export Formats — DXF, SVG, G-code & PDF

Download nested DXF geometry, SVG previews, generic G-code (.nc), and PDF job packets for CNC, laser, plasma, and documentation workflows.

Package nests for the shop floor: bundled DXF downloads for plates and parts, crisp SVG vector summaries, generic 2D G-code for each sheet or part, and PDF reports with metrics your estimators and operators expect. Every format stays aligned with what Sheet2Nest actually renders—G-code follows the exact contours (holes first, M3/M5 tool on/off) without lead-ins, kerf offsets, or machine-specific posts.

ExportFormats

Six export options for every production need

Individual Part Export

Download DXF files for each part

Export each part separately as an individual DXF file. Perfect for ordering specific components or verifying part geometry before production.

  • One file per part
  • Independent CAM setup
  • Part-specific measurements

All Nested Sheets (Single File)

Combined DXF for all nested sheets

Export all nested sheets as a single comprehensive DXF file. All parts from all sheets are included with proper positioning and layer organization.

  • Complete nesting in one file
  • Organized by layers
  • Single CAM setup

Individual Sheet Export

DXF file for each nested sheet

Export each nested sheet as a separate DXF file. Each sheet contains only the parts nested on that specific sheet with proper layout and positioning.

  • One file per sheet
  • Sheet-specific layouts
  • Independent scheduling

SVG Vector Graphics Export

Scalable vector format for design

Export nesting results as SVG files. Perfect for web viewing, design software integration, or high-resolution printing without quality loss.

  • Scalable quality
  • Web-ready format
  • Design software compatible

G-code Export

Machine-ready contour toolpaths

Download generic 2D G-code (.nc) for each nested sheet or a single part. Holes are cut before outer contours, circles become G2 arcs, and the tool switches with M3/M5. No lead-ins, kerf offset, or vendor post—check feed and commands for your controller.

  • One .nc file per sheet layout
  • Single-part G-code too
  • Holes cut before outer contours

PDF Report Export

Comprehensive detailed reports

Generate professional PDF reports with complete nesting analysis, utilization statistics, part inventory, sheet layouts, and production details. Detailed reports are covered in the next section.

  • Professional formatting
  • Utilization analysis
  • Part inventory list

ExportFeatures

Professional export capabilities for production workflows

Format Flexibility

Multiple export formats

Batch Downloads

Download all files at once

Custom Naming

Automatic intelligent naming

CAM Ready

Optimized for CAM software

Quality Assurance

Validated geometry export

Easy Integration

Seamless workflow integration

ExportWorkflow

Simple five-step process from nesting to production

1

Select Export Format

Choose your desired export format

Pick from DXF (individual parts, all sheets, or per-sheet), SVG, G-code, or PDF based on your needs.

2

Configure Export Options

Set export preferences

Choose naming conventions, units, scale, and other format-specific options.

3

Preview Layout

Review export preview

See a preview of what will be exported with all parts and sheets properly positioned.

4

Download Files

Get your files ready for production

Download as individual files or as a batch ZIP archive for convenient access.

5

Import to CAM/Software

Use in your workflow

Import into CAM software, design tools, or share with production team.

What the G-code contains

Sheet2Nest writes plain, readable G-code that follows the nested outlines exactly. It is a generic 2D cutting program—not a replacement for a machine-specific CAM post.

Units & coordinates
G21 millimeters, G90 absolute, G17 XY plane.
Origin
Sheet bottom-left for nested sheets; part bottom-left for single parts. Y up.
Tool on / off
M3 before each contour, M5 after it. Every contour is one pierce.
Cut order
Holes and open cuts first, outer contour last; parts visited nearest-first.
Moves
G0 rapids between contours, G1 along outlines, full circles as G2 arcs.
Not included
Lead-ins/outs, kerf compensation, Z or torch height, vendor posts. Bend lines are not cut.
(job - Sheet A)
(Sheet: 1250 x 2500 mm  Quantity: 3)
G21 (millimeters)
G90 (absolute coordinates)
G17 (XY plane)
M5
(Part 1: BRK-001)
G0 X35 Y20
M3
G2 X35 Y20 I-5 J0 F1500
M5
G0 X10 Y10
M3
G1 X60 Y10 F1500
G1 X60 Y30
G1 X10 Y30
G1 X10 Y10
M5
...
G0 X0 Y0
M5
M30

G-code export FAQ

Can Sheet2Nest export G-code?

Yes. Sheet2Nest exports G-code (.nc) for every nested sheet layout and for individual parts. Use "All G-code" in the export panel for one file per unique layout, "Export G-code" in a sheet's download menu, or "Export G-code" in a part's preview. More: https://sheet2nest.com/features/export-options.

What kind of G-code does Sheet2Nest generate?

Generic 2D cutting G-code for laser, plasma, waterjet, and similar profile cutters: millimeters (G21), absolute coordinates (G90), G0 rapids between contours, M3 to switch the tool on, G1 moves along each contour, full circles as G2 arcs, and M5 to switch the tool off. Holes and inner cuts are cut before each outer contour, and parts are visited nearest-first to keep rapids short.

Does the G-code include lead-ins, kerf compensation, or a machine post-processor?

No. The G-code follows the exact part outlines with no lead-ins or lead-outs, no kerf offset, no Z/torch-height moves, and no controller-specific post-processor. Set part spacing for your kerf before nesting. When you need lead-ins, common-line cutting, or a vendor post, import the nested DXF into your CAM software instead.

Can I export G-code for a single part instead of a whole sheet?

Yes. Open a part's preview in the Nesting Studio and choose "Export G-code", or use the part download menu in the free DXF viewer. Single-part G-code puts the origin at the part's bottom-left corner; nested-sheet G-code puts the origin at the sheet's bottom-left corner.

Is Sheet2Nest G-code ready to run on my machine?

Treat it as a starting program. Feed rate defaults to 1500 mm/min and the tool on/off commands are M3/M5, so check them against your controller (GRBL, LinuxCNC, Mach3/4, or a plasma/laser controller) and run the file in a G-code simulator or dry run before cutting material.

Does G-code export count toward my plan limits?

Yes. G-code downloads are layout exports, available on the same plans as DXF export and counted against the same layout export limit as DXF and SVG. See https://sheet2nest.com/pricing.

More answers on the FAQ page.

More Nesting Studio features

DXF Viewer

View DXF files in your browser, detect parts and holes, inspect dimensions, download individual parts as DXF or SVG, and send them into Sheet2Nest nesting—no account required to analyze.

DXF processing

Parse ASCII DXF files into closed contours, holes, and classified parts. Reads standard CAD entities before you nest.

Quick Add Part

Create rectangles, circles, brackets, and structural profiles from dimensions—live preview, queue multiple parts, and add them straight into nesting or cost quotes.

Part detection

Closed contours and holes are inferred from DXF geometry—less manual picking before you nest.

Try it in the Nesting Studio

Upload your DXF, review parts, set quantities, and export optimized layouts with utilization reports.

Start free nesting

Feature: Exports